| | | | | wiring harness for starter andalternator
| | wiring harness for starter andalternator | 3.6ltr. | | |
| | | | | Wiring set for starter
Petr. engine | | Wiring set for starter | 3.6ltr. | | Petr. engine |
| | | 1 | 4L0 971 228 A C | 4L0 971 228 A C qty: 1
Wiring set for starter
BHK | | Wiring set for starter | | 1 | BHK |
| | | 2 | |
Corrug. tubes, T-pieces,
clips, holders, grommets,
cable ties, insulating
hose, wiring,
single wires and seals
see special catalogue:
ELECTRICAL
CONNECTING ELEMENTS
| |
Corrug. tubes, T-pieces,
clips, holders, grommets,
cable ties, insulating
hose, wiring,
single wires and seals
see special catalogue:
ELECTRICAL
CONNECTING ELEMENTS | | | |
| | | 3 | | protective pipe
not exchangeable
| | protective pipe
not exchangeable
| | | |
| | | 4 | | protective pipe
not exchangeable
| | protective pipe
not exchangeable
| | | |
| | | 5 | 3D0 971 838 | 3D0 971 838 qty: 1
Cable tie with holder for plastic pin:
| | Cable tie with holder for plastic pin: | 5X200MM 5MM | 1 | |
| | | 6 | 1Y0 971 838 | 1Y0 971 838 qty: X
cable tie with terminal socketWith side cable guide for bridge strength:toothed quadrant(Clamp base, rotating)
| | cable tie with terminal socketWith side cable guide for bridge strength:toothed quadrant(Clamp base, rotating) | outer | X | |
| | | 7 | | qty: || 1
Corrugated tube clip Discont. / replace:
| | Corrugated tube clip Discont. / replace: | 3D0 971 838 N | || 1 | |
| | | (7) | 3D0 971 838 N | 3D0 971 838 N qty: X
Cable ties with bracket For hole/material thickness:
| | Cable ties with bracket For hole/material thickness: | 4, 5X200 6, 5/0, 3-3MM | X | |
| | | 8 | 7L0 971 461 | 7L0 971 461 qty: 1
Heat protection sleeveWiring set for starter
| | Heat protection sleeveWiring set for starter | | 1 | |
| | | 9 | N10 248 003 | N10 248 003 qty: 1
Socket head bolt withinner multipoint head
| | Socket head bolt withinner multipoint head | M6X14 | 1 | |
| | | 10 | 03H 971 501 A | 03H 971 501 A qty: 1
holder for wiring harness
| | holder for wiring harness | | 1 | |
| | | 11 | N01 100 840 | N01 100 840 qty: 1
Hexagon nut
| | Hexagon nut | M8 | 1 | |
| | | 12 | N90 403 004 | N90 403 004 qty: 1
Cover cap
| | Cover cap | 13X14 | 1 | |
| | | 13 | 7L6 971 504 | 7L6 971 504 qty: 1
Bracket
| | Bracket | | 1 | |
| | | 14 | N90 295 502 | N90 295 502 qty: 1
Hexagon collar nut
| | Hexagon collar nut | M8 | 1 | |
| | | 15 | | Slave start socket see illustration:
| | Slave start socket see illustration: | 972-000 | | |
| | | 16 | N02 062 67 | N02 062 67 qty: 1
Clamp
| | Clamp | 16X15 | 1 | |
| | | 17 | N01 100 636 | N01 100 636 qty: 1
Hexagon nut
| | Hexagon nut | M6 | 1 | |
| | | | | Wiring set for three-phasealternator
Petr. engine | | Wiring set for three-phasealternator | 3.6ltr. | | Petr. engine |
| | | 20 | 4L0 971 349 D | 4L0 971 349 D qty: 1
Wiring set for three-phasealternator
PR:8GV | | Wiring set for three-phasealternator | 180A | 1 | PR:8GV |
| | | (20) | 7L6 971 349 C | 7L6 971 349 C qty: 1
Wiring set for three-phasealternator
PR:8GH | | Wiring set for three-phasealternator | 190A | 1 | PR:8GH |
| | | 21 | | qty: || 1
Corrugated tube clip Discont. / replace:
| | Corrugated tube clip Discont. / replace: | 3D0 971 838 N | || 1 | |
| | | (21) | 3D0 971 838 N | 3D0 971 838 N qty: X
Cable ties with bracket For hole/material thickness:
| | Cable ties with bracket For hole/material thickness: | 4, 5X200 6, 5/0, 3-3MM | X | |
| | | 22 | N90 697 901 | N90 697 901 qty: 1
bracket for corrugated pipe
| | bracket for corrugated pipe | 13 | 1 | |
| | | 23 | | Slave start socket see illustration:
| | Slave start socket see illustration: | 972-000 | | |
| | | 24 | N90 295 502 | N90 295 502 qty: 1
Hexagon collar nut
| | Hexagon collar nut | M8 | 1 | |
| | | 25 | 4D0 903 181 | 4D0 903 181 qty: 1
Collar nut
| | Collar nut | M8 | 1 | |
