| | | | cylinder blockSealing flangeoil sump | 3.0Ltr.Observe the grouping rule in the Workshop Manual | | 6-cylinder+ Diesel eng.+ CRTF,CRTE, CRTD,CZVB, CZVD,CZVC, CZVA,CZVE, CZVF |
| | 1 | 059 103 011 H J | Crankcase housingsee workshop manual also use panel, position: also use panel, position: use if required: | Observe the grouping rule in the Workshop Manual | 1 | |
| | 2 | WHT 003 959 | Hexagon head bolt | M11X1, 5X107 | 16 | |
| | 3 | 079 103 051 D | Shaft oil seal | | 1 | |
| | 4 | N91 167 901 | sealing plug | M14X1, 50 | 1 | |
| | 5 | 059 103 138 B D | Insert | | 1 | |
| | 6 | 057 103 147 A | Seal | | 4 | |
| | 7 | 059 103 153 C E | Sealing flange only in conj. with:Hexagon socket flathead bolt D >> - 19.05.2014 | front N 101 243 06 M6X20 | 1 || 1 | |
| | (7) | 059 103 153 C H | Sealing flange only in conj. with:Hexagon socket flathead bolt D - 19.05.2014>> - 09.02.2015 | front N 107 002 01 M6X22 | 1 || 1 | |
| | (7) | 059 103 153 C J | Sealing flange only in conj. with:Hexagon socket flathead bolt D - 09.02.2015>> | front N 107 002 01 M6X22 | 1 || 1 | |
| | 7A | 059 103 161 A Q | Seal D >> - 07.12.2015 | | 1 | |
| | (7A) | 059 103 161 A T | Seal D - 07.12.2015>> | | 1 | |
| | 7B | | WasherNot for this model | 74X67X3, 5 | 1 | |
| | 8 | | Non-return valveNo replacement part | | | |
| | 9 | 059 103 171 D P | Sealing flange also use: only to be used for: | rear 057 103 147 A D 176 501 A1 012 301 153 H 059 906 433 J 059 906 433 K | 1 || 2 || 1 || 3 | |
| | 9 | 059 103 171 D T | Sealing flangesee workshop manual only in conj. with: use if required: also use: | rear 057 906 433 C 8K0 971 921 A 057 103 147 A D 176 501 A1 012 301 153 H | 1 || || || || 2 || 1 || 3 | |
| | 9A | 012 301 153 H | dowel sleeve | 12X13, 5 | 3 | |
| | (10) | 059 103 602 A M | oil sump-lower part D >> - 01.06.2017 | | 1 | |
| | (10) | 059 103 602 B G | oil sump-lower part D - 01.06.2017>> | | 1 | |
| | 11 | 059 103 603 F E | Engine oil sump upper part | | 1 | |
| | 13 | 059 103 610 J | Seal | | 1 | |
| | 14 | 059 103 176 B | Non-return valve D >> - 13.04.2015 | | 1 | |
| | (14) | 059 103 176 E | Non-return valve D - 13.04.2015>> | | 1 | |
| | 15 | 059 103 158 R | jet | | 3 | CRTD |
| | (15) | 059 103 158 R | jet D >> - 16.11.2015 | | 3 | CRTE,CRTF, CZVA,CZVB, CZVC,CZVD |
| | (15) | 059 103 158 P | jet D - 16.11.2015>> | | 3 | CRTE,CRTF, CZVA,CZVB, CZVC,CZVD, CZVE,CZVF |
| | 16 | 055 105 277 | spring pin | 6, 2X22 | 2 | |
| | 17 | 059 103 051 K | Shaft oil seal | 85X105X8 | 1 | |
| | 18 | 059 103 273 B C | balancer shaft D >> - 22.10.2014 | | 1 | |
| | (18) | 059 103 273 B E | balancer shaft D - 22.10.2014>> | | 1 | |
| | - | 059 103 323 D | thrust washer to be used for item: | 22X36X1, 5 18 | 1 | |
| | 19 | 022 103 139 B | dowel sleeve | 16X13, 5 | 2 | |
| | 20 | N10 745 101 | Hexagon socket flathead bolt | M6X20 | 16 | |
| | 21 | N01 190 310 | End cap also use: | 16 D 000 600 A2 | 2 | |
| | 22 | N10 766 201 | Hexagon socket flathead bolt | M6X12 | 4 | |
| | 23 | 059 103 707 D | Cover (plastic) | | 2 | |
| | 24 | N90 466 301 | O-ring | | 2 | |
| | 25 | N01 191 410 | End cap also use: | 24 D 000 600 A2 | 2 | |
| | 26 | N10 667 801 | Cylinder pin | 6X16 | 2 | |
| | 27 | N01 383 26 | seal ring | 18X22 | 1 | |
| | 28 | N01 384 94 | seal ring | 14X20 | 1 | |
| | 29 | N91 196 501 | sealing plug | M18X1, 50 | 1 | |
| | (31) | N10 700 201 | Hexagon socket head bolt only to be used for: | M6X22 059 103 153 CH | 22 | |
| | 31 | N10 124 306 | Oval hexagon socket head bolt only to be used for: | M6X20 059 103 153 CE | 22 | |
| | 32 | N10 745 101 | Hexagon socket flathead bolt | M6X20 | 4 | |
| | 33 | N10 745 301 | Oval hexagon socket head bolt | M8X30 | 16 | |
| | (33) | N91 076 601 | Socket head bolt with innermultipoint headsee workshop manual | M8X30 | 2 | |
| | 35 | D17 650 1A1 | Silicon sealant | 50mlblack | X | |
| | 36 | | Hexagon collar nut for this use: | 059 103 273 AK | | |
| | 37 | WHT 004 873 | fillister head bolt withmulti-point socket head | M7X40 | 9 | |
| | 38 | WHT 004 874 | fillister head bolt withmulti-point socket head | M7X105X39 | 5 | |
| | 39 | N91 054 701 | Hex socket head locating bolt | M6X6X12 | 4 | |
| | 40 | | oil level sensor see illustration: | 919-045 | | |
| | 41 | | Hexagon socket flathead bolt see illustration: | 919-045 | | |
| | 42 | | for this use: | 059 121 155 AG | | |
| | 45 | 059 103 332 T | Balancer weight | front | 1 | |
| | 46 | N90 893 202 | fitted bolt, hexagon head | M10X20 | 1 | |
| | 48 | N10 456 004 | Hexagon socket head bolt, self-locking | M6X12 | 5 | |
| | 49 | | Balancer weight for this use: | 059 103 273 BC | | |
| | 51 | 059 103 869 D | needle bearing - | 25X33X20 | 1 | |
| | 52 | 059 103 869 A | needle bearing - | D=22 MM | 1 | |
| | 53 | 057 103 139 | dowel sleeve | | 4 | |
| | 54 | 06M 115 393 D | control valve | | 1 | |
| | 54A | 06M 115 475 | O-ring | 14X2 | 1 | |
| | 55 | N10 196 103 | Oval socket head boltwith hex drive | M6X18 | 1 | |
| | (56) | | Coolant regulator see illustration, item: | 121-000, 6 | 1 | |
| | (57) | | Seal see illustration, item: | 121-000, 8 | 1 | |
| | (58) | | seal ring see illustration, item: | 121-000, 7 | 1 | |
| | 59 | | Sensor for radiatoridentification/temperature see illustration: | 919-045 | | |
| | 60 | N10 451 408 | Oval hexagon socket head bolt | M6X16 | 1 | |
| | 61 | D17 650 1A1 | Silicon sealant | 50mlblack | 1 | |
| | 62 | 059 103 826 B | adapter sleeve | | 1 | |
| | 63 | WHT 002 287 C | O-ringSensor for radiatoridentification/temperature | 5, 6X2N | 1 | |
| | (63) | N90 851 401 | O-ringadapter sleeve | 14X1, 78 | 1 | |
| | 64 | 059 906 433 K | impulse senderCrankshaft only to be used for: | 059 103 171 DP 059 103 171 DG | 1 | |
| | 64 | 057 906 433 C | impulse senderCrankshaft only to be used for: | 059 103 171 DT | 1 | |
| | 65 | N10 405 604 | Oval hexagon socket head bolt | M6X14 | 1 | |
| | (66) | N10 156 206 | Oval hexagon socket head bolt | M6X30 | 10 | |
| | 67 | N10 124 306 | Hexagon socket flathead bolt | M6X20 | 8 | |
| | (68) | 059 109 122 T | Cover also use: | cylinders 1-3 D 176 501 A1 | 1 || X | |
| | (69) | 059 109 122 A A | Cover also use: | cylinders 4-6 D 176 501 A1 | 1 || X | |
| | 70 | 059 109 092 N | Seal also use: only to be used for: | cylinders 1-3 D 176 501 A1 059 109 122 T | 1 || X | |
| | (71) | 059 109 091 N | Seal also use: only to be used for: | cylinders 4-6 D 176 501 A1 059 109 122 AA | 1 || X | |
| | 72 | | oil filter see illustration: | 115-056 | | |
| | 73 | | Hexagon socket headbolt see illustration: | 115-056 | | |
| | 74 | | stop washerNot for this model | | | |
| | 75 | | Pipe see illustration, item: | 131-040, 30 | | |
| | 76 | | seal ring see illustration, item: | 131-040, 31 | | |
| | 77 | | Hexagon socket headbolt see illustration, item: | 131-040, 32 | | |
| | 78 | 059 103 565 C | Cover | | 1 | |
| | 80 | 059 121 155 B K | Cover also use: | N 907 834 02 | 1 || 1 | |
| | 81 | N90 783 401 | O-ring | 13, 1X1, 6 | 1 | |
| | 82 | 059 103 708 A | Cover | | 1 | |
| | 83 | 059 103 147 S | Seal | | 1 | |
| | 84 | N91 021 502 | round hd. screw | M8X25 | 3 | |
| | 84 | N01 024 232 | Hexagon bolt | M8X25 | 1 | |