| | | | | cylinder block with pistonsoil sump | 1.8ltr.
110KW | | 4-cylinder+
AWT |
| | | (1) | 06B 103 101 J | cylinder block with pistons | | 1 | |
| | | - | 06D 133 335 A | Cap | 11, 8MM | 1 | |
| | | - | N90 739 901 | clamp | 31X10X0, 8 | 2 | |
| | | 3A | D17 640 4A2 | Silicone sealant | 93G | 1 | |
| | | (4) | 06B 103 601 P | Engine oil sump with openingfor oil level sensor | | 1 | |
| | | (5) | N01 384 95 | seal ring | 14X20 | 1 | |
| | | 6 | N90 660 601 | oil drain plug | M14X1, 5X18 | 1 | |
| | | (8) | N90 130 001 | Hexagon boltcrankshaft bearing | M10X80 | 10 | |
| | | (9) | N90 628 303 | Hexagon bolt | M10X95 | 2 | |
| | | (10) | 06D 103 634 | tube for oil dipstick | | 1 | |
| | | (11) | 06B 103 663 G | guide funnel | | 1 | |
| | | (12) | 06A 103 171 A | Sealing flange | rear | 1 | |
| | | (13) | N90 945 002 | hexagon socket head bolt withshoulder | M7X21, 5 | 12 | |
| | | 14 | | No replacement part | | | |
| | | (15) | N01 190 710 | End cap | 14 | 3 | |
| | | 16 | 026 103 139 | Cylinder pin | 6M6X20 | 2 | |
| | | (17) | 022 103 139 | dowel sleeve | 16X13, 5 | 2 | |
| | | (19) | N01 190 85 | End cap | 28 | 1 | |
| | | (20) | 034 133 382 A G | Pipe union | | 2 | |
| | | (21) | 038 103 151 H | Sealing flange | front | 1 | |
| | | (22) | 038 103 085 E | Shaft oil seal | 35X48X10 | 1 | |
| | | 23 | N04 320 72
04.2001-01.2004 | Cylinder pin F >> 4B-4-077 290
| 8X14 | || 4 | |
| | | (23) | N10 617 101
02.2004-01.2005 | Cylinder pin F 4B-4-077 291>>
| 8X12 | || 4 | |
| | | (26) | 06B 103 154 | oil spray jet | | 4 | |
| | | (28) | N90 704 007 | hexagon socket head bolt withshoulder | M7X55 | 7 | |
| | | (28A) | N90 945 002 | hexagon socket head bolt withshoulder | M7X21, 5 | 18 | |
| | | (29) | 06B 103 551 G | Spacer plate | | 1 | |
| | | 30 | | oil level sensor see illustration: | 919-060 | | |
| | | 31 | | see illustration: | 919-060 | | |
| | | (33) | 06B 103 675 B | Retaining plate | | 1 | |
